RMP60 is the latest generation of radio transmission part probing system
ideal for use on all machine tools. RMP60 features an integrated probe
module delivering exceptional robustness and generous overtravel.
RMP60 complies with FCC regulations and operates in the 2.4 GHz
range. RMP60 delivers interference-free transmission through the use of
FHSS (frequency hopping spread spectrum).
RMP60 supports three methods of probe activation:
Radio-on The probe is turned on via an RF signal produced by the RMI
and initiated by an M code. The probe is turned off via an RF
signal or the internal timer.
Spin-on The probe is turned on via an internal centrifugal switch. The
probe is turned off via the centrifugal switch or the internal
timer.
Switch-on The probe is turned on and off via a switch incorporated
into the shank, activated when the probe is loaded into the
spindle.
Sense directions ±X, ±Y, +Z
Stylus overtravel
X and Y: ±18°
Z: 11 mm (0.43 in)
Stylus trigger force
(factory set using 50 mm stylus)
X and Y: 75 gf – 140 gf
Z: 530 gf
Unidirectional repeatability
(max 2 sigma value)
1.0 μm (0.00004 in)
